TU SERIES Hydraulische momentsleutel met aandrijfvierkant
Het meest duurzame en ongecompliceerde hydraulische momentsleutel in de industrie
De TU-serie is een betrouwbare tool, sterk genoeg om veeleisende toepassingen te overwinnen met een nauwkeurigheid van +/- 3%. De TU kan omgaan met die ultieme toepassingen waarbij deze sleutel zich onderwerpt aan niet zachtzinnig gebruik. De TU Square Drive hydraulische momentsleutel is de sleutel waarop u kunt vertrouwen wanneer het kritieke werk goed moet worden gedaan ... en dat in een keer!!
VASCOMAX® betekend het is 30% Sterker en 15% Harder!
- Made in the USA
- Zeven modelen van 172 Nm tot 78625 Nm
- Elke TU sleutel in ISO17025 Laboratoriumy
- Gemaakt met AQ Certified Alloys
- Origineel TorcUP-ontwerp
Wie zegt dat je opoffering moet zoeken voor kracht? Een goed uiterlijk is nog maar het begin, met een duidelijk voordeel toegevoegd aan de aandrijfplaat, het segment en de ratel. Deze drie componenten hebben het meeste last van slijtage en zijn in de TU gemaakt van Vascomax®, wat betekent dat ze 30% sterker en 15% harder zijn. Over de hele wereld zal de TU-serie altijd onderscheidend blijven op het gebied van momentsleutels.
-
Kenmerken
Patented Mono-Body Housing
This feature is a TorcUP exclusive. The TU Series housing is machined from a single block of 7075 AQ Aluminum, which reduces torsion and flex on the body of the tool under pressure.
Dual Independent Swivels
The unique swivel design allows for 360 degree by 360 degree independent movement of the hoses to avoid any and all reaction points.
Push-Through Drive
The push-through square drive allows the user to switch easily from loosen to tighten without having to remove the drive.
Steel Reaction Boot
This feature protects the main reaction point of the arm and is field replaceable.
Laser Engraved Torque Chart
The dual sided shroud is laser engraved with the torque chart for the TU Series, preventing lost charts during use.
Reaction Arm Release Button
The release button for the reaction arm is set within the arm as a safety feature, protecting the arm from accidental disengagement.
Multi-Tooth Drive Segment
This design ensures a 27 degree stroke each time the tool fully advances.
No Drip Quick Connect Couplers
These 3:1 rated safety couplers are designed for simple engagement. The coupler collar ensures safe operation. -
Technische Data
Part # TU-2 TU-3 TU-5 TU-7 TU-11 TU-20 TU-27 TU-60 Square Drive 3/4" 1" 1 1/2" 1 1/2" 1 1/2" 2 1/2" 2 1/2" 2 1/2" Minimum Torque (Ft/lbs) 127 330 550 740 1100 1940 2720 5800 Maximum Torque (Ft/lbs) 1270 3300 5500 7400 11010 20625 27200 58000 Minimum Torque (Nm) 172 447 745 1003 1491 2630 3687 7862 Maximum Torque (Nm) 1722 4514 7457 10031 14925 27964 36872 78625 Output Accuracy +/-3% +/-3% +/-3% +/-3% +/-3% +/-3% +/-3% +/-3% Repeatability 100% 100% 100% 100% 100% 100% 100% 100% Duty Cycle 100% 100% 100% 100% 100% 100% 100% 100% Tool Weight (lbs) 3.90 9.00 17.00 19.00 29.00 60.80 70.00 130.00 Tool Weight (Kg) 2 4 7.7 8 13.15 27.7 31 58
Part # TU-2 TU-3 TU-5 TU-7 TU-11 TU-20 TU-27 TU-60 Height 4.20" /
106.7mm5.30" /
134.6mm6.4" /
162.6mm7.14" /
181.4mm7.81" /
198.4mm9.22" /
234.3mm10.19" /
258.8mm11.50" /
292.1mmLength 1 4.82" /
122.4mm6.20" /
157.5mm7.91" /
200.91mm8.45" /
214.6mm9.25" /
235.0mm9.44" /
239.7mm12.32" /
321.9mm15.38" /
390.7mmLength 2 6.34" /
161.0mm8.20" /
208.3mm10.66" /
270.76mm11.19" /
284.2mm12.25" /
311.2mm16.09" /
408.9mm16.33" /
414.8mm20.40" /
518.2mmRadius 0.98 /
24.91.29 /
32.81.57" /
39.88mm1.75 /
44.51.91 /
48.52.31 /
58.72.46 /
62.53.10 /
78.7Width 1 2.00 /
50.82.63 /
66.83.12" /
79.25mm3.61 /
91.73.95 /
100.34.87 /
123.65.26 /
133.66.58 /
167.1Width 2 2.79 /
70.93.68 /
93.54.64" /
117.86mm5.06 /
128.55.43 /
137.97.15 /
181.77.57 /
192.38.89 /
225.8Width 3 4.42 /
112.35.81 /
147.67.00" /
177.8mm7.98 /
202.78.72 /
221.510.88 /
276.411.63 /
295.414.29 /
363.0 -
Documenten / Downloads
-
Accessoires
TU Direct Hex Drive Adaptor
Replace the square drive of your TU tool with this hex drive adaptor to drive socket head cap screws.TU End Cap Protector
This accessory provides protection for the end cap when operating the tool without the reaction arm.TU Extended Reaction Tube
Attach this reaction tube in place of the standard reaction arm when your reaction point is located further from the nut.TU Housing Reaction Pad
The housing reaction pad provides a flat surface when reacting directly off the body of the tool.TU Solid Square Drive
This square drive provides a non-push-through variation for tightening and loosening.TU Reaction Arm Extension Boot
These boots, available for most models in 1”, 2” or 3”, provide additional reaction length at the base of the standard reaction arm.TU Solid Long Extension Arm
Available for the TU-2, TU-3, TU-7 and TU-11 models, this solid reaction arm is 6” longer than the standard reaction arm of each tool, allowing for a further reaction point.TU Wide Reaction Arm
When your reaction point does not hit firmly at the center of the standard arm, this arm provides a wider reaction plane. This can be factory installed as an option and is only available for the TU-2 and TU-3.TU Tool Handle
This ergonomically designed handle for TorcUP hydraulic tooling can be attached to the tool for safe operation and positioning of the tool, while keeping hands clear of any reaction points.
