Bolting tools
TorcUP TNS hydraulic nut splitter
For when the nut simply won't come loose: split in seconds, without a cutting torch
-
BrandTorcUP
-
DriveHydraulic
-
Models8
-
Bolt size1/2 – 3" (12 – 76 mm)
-
Working pressure700 bar
-
Available forBuy
The TorcUP TNS nut splitter is there for when you simply can't get the nut loose. You no longer need a cutting torch or other unpredictable means: the TNS splits the nut safely, without sparks or flames, and without damaging the thread of the bolt or stud. There are eight models, for bolts from 1/2 to 3 inch (12 to 76 mm). The TNS is made in the United States.
Models
| Model | Bolt size (inch) | Bolt size (mm) | Opening A (mm) | Length (mm) | Chisel |
|---|---|---|---|---|---|
| TNS-012 | 1/2 – 3/4" | 12 – 19 | 50.8 | 170 | TNS-10T |
| TNS-100 | 13/16 – 1" | 20 – 25 | 57.2 | 176 | TNS-10T |
| TNS-104 | 1 1/16 – 1 1/4" | 27 – 32 | 95.3 | 300 | TNS-30T |
| TNS-108 | 1 5/16 – 1 1/2" | 33 – 38 | 95.3 | 310 | TNS-30T |
| TNS-112 | 1 9/16 – 1 3/4" | 39 – 45 | 114.3 | 354 | TNS-50T |
| TNS-200 | 1 13/16 – 2" | 46 – 50 | 127.0 | 361 | TNS-50T |
| TNS-208 | 2 1/16 – 2 1/2" | 50 – 63 | 158.8 | 462 | TNS-75T |
| TNS-300 | 2 9/16 – 3" | 63 – 76 | 165.1 | 472 | TNS-75T |
Sizes according to the TorcUP catalogue. Which model fits also depends on the nut; feel free to ask us.
Not sure which tool best suits your application? Contact us; we will be happy to advise you.
Features
Stiff and strong
A simple, rugged design.
Quick to set up
Set up in a few minutes, and the nut is split in seconds; with a cutting torch it takes hours.
Safe
No sparks, no flames, no flying pieces.
Fits any flange
The tool head fits all API and ANSI flanges.
Thread stays intact
The nut is split without damaging the bolt or stud.
Chisel replaceable on site
The chisels (TNS-10T, -30T, -50T and -75T) are wear parts that you replace yourself.
13-month warranty
Factory warranty on material and manufacturing defects (not on chisels).
Applications
Seized and damaged nuts
Nuts that can no longer be turned, due to corrosion, galled thread or a damaged hex.
Flanged joints
Pipelines and valves in the oil and gas industry, petrochemicals and power generation.
Maintenance and shutdowns
Quick and safe disassembly where hot work is not allowed or not possible.
Technical data
-
OperationHydraulic, single-actingGeneral
-
Max. working pressure700 bar (10,000 psi)General
-
Bolt size1/2 – 3" (12 – 76 mm), in 8 modelsGeneral
-
ChiselsTNS-10T, TNS-30T, TNS-50T en TNS-75TGeneral
-
Warranty13 months (not on wear parts such as chisels)General
Accessories
HP100 hydraulic hand pump
Two-stage, relief valve, usable horizontally and vertically; 700 bar.
AP100 hydraulic air pump
Air pressure 7.5 – 12 bar; 700 bar.
EP100 electric pump
Quiet (80 dBA), two speeds, remote control on 3 m cable; 700 bar.
Spare chisels
TNS-10T, TNS-30T, TNS-50T en TNS-75T.
