DWL-280Pro torpedo level IP67 0.05°
Waterproof digital torpedo level (IP67) with magnet, 0.05°
Features
Waterproof and dustproof (IP67)
Works in harsh conditions: offshore, in severe frost and in a wet, tropical climate.
Wide temperature range
Operating temperature from –20 °C to +60 °C: from extreme heat to severe frost.
Built-in magnet
Strong magnets in the base hold the level on metal surfaces, so you can work hands-free.
User self-calibration
Easily restore the level yourself to the accuracy set in the factory.
Resolution 0.05°
Measuring resolution 0.05°; accuracy ±0.05° at 0° and 90°, ±0.2° between 1° and 89°.
Inverted display reading
The reading is always upright on the display, even when the level is used upside down.
Measuring range 4 × 90°
Measuring range 0° – ±90°, 4 × 90° (360°).
Instant unit conversion
Switch instantly between degrees (°) and slope percentage (%).
Alternate zero
Set any desired angle as the reference angle (zero).
Applications
Motorsport
Building and setting up race cars: measuring suspension angles for analysis and checks, saving a lot of time.
Spoiler angle
Quickly check and adjust the angle of a rear spoiler, for less drag and more downforce.
Piping and sewerage
Thanks to IP67 suitable for laying and repairing drainage pipes: correct position, fall and alignment of the pipes.
Offshore oil and gas
Adjusting drilling rigs in the offshore oil and gas industry.
Drilling tools
Aligning drilling tools.
Shipbuilding
Repair and new construction of ships at the yard.
Steel construction
Reliable at –20 °C to +60 °C; the bright LED display and IP67 make the level indispensable on bridges, tunnels and steel structures.
Satellite dishes
Align a satellite dish quickly and effortlessly: level the mast and set the dish to the correct elevation angle.
Frames and doors
Installing and checking frames: square, level relative to the wall and with right angles.
Solar panels
Installing solar panels and periodically checking the correct tilt angle.
Gutters
Fit gutters and downpipes with the correct fall; readings in mm/m or inch/ft speed up the adjustment.
